
모든 배송은 탄소 중립적입니다.
Powered by Shopify Planet
1
/
의
7
Cheetahstand
Low Profile Bowen Speed Ring Insert for Paul C. Buff Softboxes (5 1/2" - 139mm)
Low Profile Bowen Speed Ring Insert for Paul C. Buff Softboxes (5 1/2" - 139mm)
정가
$36.00 USD
정가
할인가
$36.00 USD
단가
/
단위
51 reviews
픽업 사용 가능 여부를 로드할 수 없습니다.
Cheetah Stand Exclusive!
The flash tube on the Godox AD600 and Flashpoint XPLOR 600 sits very close to the head. With a standard Bowen mount, the base of the flash tube is covered by the speedring, which may lower the light output. The low-profile design of this ring extends the flash head further into the softbox, distributing the light from the flash more efficiently and evenly.
On the Godox AD600 Pro and Flashpoint XPLOR 600 Pro, the standard speedring can cover a portion of the heat sink. This speedring insert covers much less of the heat sink, allowing more air flow to keep the flash cooler. A cooler flash tube will last longer and produce more consistent light.
Although it was designed for the flashes listed above, it's use is not limited to those flashes. The low-profile insert can be used on most flashes with a Bowen mount to improve the quality of light versus a standard depth Bowen insert.
Designed specifically for the Godox AD-600B, AD600BM, AD600Pro and AD400Pro (also sold as the Cheetahstand CL-600X, Flashpoint XPLOR 600, XPLOR 600PRO and XPLOR400 Pro. This mount will not fit on the Godox AD-B2 Dual Strobe Heads. The Low Profile Bowens Mount may cause interference with other brands Bowen Mounts as the frame of the light will jam with the softbox flange. Please make sure your strobes will work with this.
Measure Your Speed Ring: Please measure the diameter of your existing insert to make sure it is compatible. The outer diameter of this insert is 139mm (5 1/2").
We carry two other sizes of this speedring insert, in addition to this 139mm (5 1/2"):
5 2/3" (144mm) Low Profile Speed Ring - Fits Jinbei softboxes and any other softbox with a 5 2/3" (144mm) speedring insert. Many Paul C. Buff softboxes use a 144mm speedring insert.
6" (152mm) Low Profile Speed Ring - Fits Cheetah Quick Series and Quick Silver softboxes and any other softbox with a 6" (152mm) speedring insert
Make sure to watch the instructional video below on how to measure your softbox to make sure you order the correct size. The video also shows how to install the insert on your softbox.
Installation Notes: No mounting screws or washers are included. Simply use the screws and washers from your softbox. If any thumbscrews are used in your existing mount, you may need to replace those with a standard phillips head screws because thumbscrews may be too long and won't allow the ring to be fully inserted into the flash.
The 139mm Low Profile Speed Ring Does work with the Aperture 120D.
Does not work with the Godox AD-B2 or Aperture 300X.
The flash tube on the Godox AD600 and Flashpoint XPLOR 600 sits very close to the head. With a standard Bowen mount, the base of the flash tube is covered by the speedring, which may lower the light output. The low-profile design of this ring extends the flash head further into the softbox, distributing the light from the flash more efficiently and evenly.
On the Godox AD600 Pro and Flashpoint XPLOR 600 Pro, the standard speedring can cover a portion of the heat sink. This speedring insert covers much less of the heat sink, allowing more air flow to keep the flash cooler. A cooler flash tube will last longer and produce more consistent light.
Although it was designed for the flashes listed above, it's use is not limited to those flashes. The low-profile insert can be used on most flashes with a Bowen mount to improve the quality of light versus a standard depth Bowen insert.
Designed specifically for the Godox AD-600B, AD600BM, AD600Pro and AD400Pro (also sold as the Cheetahstand CL-600X, Flashpoint XPLOR 600, XPLOR 600PRO and XPLOR400 Pro. This mount will not fit on the Godox AD-B2 Dual Strobe Heads. The Low Profile Bowens Mount may cause interference with other brands Bowen Mounts as the frame of the light will jam with the softbox flange. Please make sure your strobes will work with this.
Measure Your Speed Ring: Please measure the diameter of your existing insert to make sure it is compatible. The outer diameter of this insert is 139mm (5 1/2").
We carry two other sizes of this speedring insert, in addition to this 139mm (5 1/2"):
5 2/3" (144mm) Low Profile Speed Ring - Fits Jinbei softboxes and any other softbox with a 5 2/3" (144mm) speedring insert. Many Paul C. Buff softboxes use a 144mm speedring insert.
6" (152mm) Low Profile Speed Ring - Fits Cheetah Quick Series and Quick Silver softboxes and any other softbox with a 6" (152mm) speedring insert
Make sure to watch the instructional video below on how to measure your softbox to make sure you order the correct size. The video also shows how to install the insert on your softbox.
Installation Notes: No mounting screws or washers are included. Simply use the screws and washers from your softbox. If any thumbscrews are used in your existing mount, you may need to replace those with a standard phillips head screws because thumbscrews may be too long and won't allow the ring to be fully inserted into the flash.
The 139mm Low Profile Speed Ring Does work with the Aperture 120D.
Does not work with the Godox AD-B2 or Aperture 300X.
Share






M
Mary Larsen Installed easily; seems to hold the 47” Octabox securely on my Godox Wistro Ad400! Thank you!
L
Lavish 73 Media Quick, responsive, and a great product. Can't ask for much more.
R
Rutilio Gonzalez Excellent service, and Product very happy, it fit my Paul C Buff softboxes Thanks
C
Customer I ordered this product to convert the speed ring for my 47" octabox that I used with my old Alien Bees to be able to use it with my new Westcott FJ400 lights. It worked perfectly and I'm now able to use my octabox with my new lights and I don't have to go out and spend a bunch of money on new lighting modifiers. The shipping was also super fast!
K
Kathy Baxley Thanks!