所有配送均为碳中和配送
Powerd by Shopify Planet
跳至产品信息
1 / 6

Cheetahstand

Low Profile Bowen Speed Ring Insert (5 11/16" - 144mm)

Low Profile Bowen Speed Ring Insert (5 11/16" - 144mm)

常规价格 $25.00 USD
常规价格 促销价 $25.00 USD
销售额 售罄
This 144mm Low Profile Bowen Ring will work with all softbox with 144mm interchangeable ring.

Most Phottix, Jinbei and Adorama and some other brand soft box use this 144mm (511/16")
Also The latest Paul C Buff softbox use 144mm insert


Make sure measure it before you order



This ring does not work with Godox AD-B2

Confirm work with Aputure Led Light


Low Profile Bowen: This insert is designed specifically for the Godox AD-600B, AD600BM, AD600Pro and AD400Pro (also sold as the Cheetah CL-600X, Flashpoint XPLOR 600 HSS, XPLOR 600 HSS TLL, XPLOR 600Pro, XPLOR 400 Pro). Important: Do not order this mount for the Godox AD-B2 Dual Flash Adapter for the AD200, it will not fit. For the AD-B2, select the standard Bowen mount. It is not recommended for other Bowen mount lights because the low-profile design may cause the flange on the insert to contact the frame of the light before it is fully installed into the light. It could become jammed.

Cheetah Stand Exclusive!

Convert your softboxes to work with your Godox AD600 and AD-B2! IMPORTANT NOTE: Please measure the diameter of your existing speedring insert before ordering. See video for details.

PRODUCT UPDATE! Some of the new Paul C. Buff softboxes are now using a 144mm speedring insert. This insert is the perfect way to adapt those softboxes to work with Bowen S Mount flashes and lights.

This insert allows you to use softboxes that have an interchangeable 144mm (5 11/16") speedring insert with the Godox AD-600B and AD-600BM strobe, the Godox AD-B2 Flash Bracket (which holds two AD200) or our Speed Pro S Bracket. The low-profile design of this ring extends the flash head further into the softbox, distributing the light from the flash more efficiently and evenly.

The outer diameter of this ring is 5 11/16" (144mm) so it is designed to fit any interchangeable ring softbox that uses the 5 11/16" insert. Note: This ring does NOT fit any CheetahStand softboxes.

This Low Profile Bowen speedring insert will help you make the most of the light from your flash, especially with the Godox AD600, AD600 Pro, Flashpoint XPLOR 600, XPLOR 600 Pro. It is designed to fit softboxes with interchangeable speedring inserts. This allows you to use your existing softboxes with different lights.

The flash tube on the Godox AD600 and Flashpoint XPLOR 600 sits very close to the head. With a standard Bowen mount, the base of the flash tube is covered by the speedring, which may lower the light output. The low-profile design of this ring extends the flash head further into the softbox, distributing the light from the flash more efficiently and evenly.

On the Godox AD600 Pro and Flashpoint XPLOR 600 Pro, the standard speedring can cover a portion of the heat sink. This speedring insert covers much less of the heat sink, allowing more air flow to keep the flash cooler. A cooler flash tube will last longer and produce more consistent light.

Although it was designed for the flashes listed above, it's use is not limited to those flashes. The low-profile insert can be used on most flashes with a Bowen mount to improve the quality of light versus a standard depth Bowen insert.

We carry two other sizes of this speedring insert:
5 1/2" (139mm) - Fits Paul C. Buff softboxes with speedring insert and any other softbox with a 5 1/2" (139mm) speedring insert
6" (152mm) - Fits Cheetah Quick Series and Quick Silver softboxes and any other softbox with a 6" (152mm) speedring insert

Make sure to watch the instructional video below on how to measure your softbox to make sure you order the correct size. The video also shows how to install the insert on your softbox.

Installation Notes: No mounting screws or washers are included. Simply use the screws and washers from your softbox. If any thumbscrews are used in your existing mount, you may need to replace those with a standard phillips head screws because thumbscrews may be too long and won't allow the ring to be fully inserted into the flash.


查看完整详细信息

Customer Reviews

Based on 13 reviews Write a review